Version 17 (modified by salcock, 10 years ago) (diff)

Update tool tricks page

The various tools can do some neat things that you might not realise. Here is a list of cool things they can do.

For more specific details on what each tool can do, go here

Things all tools can do

All tools can read off a network with the following formats:


The tools can also read from stdin using the following URIs:


All tools can write to a network with int: or pcapint:, or to standard out with pcapfile:-, pcap:- or erf:-

Investigate what is in a trace

 tracepktdump erf:trace.erf    

NOTE: You probably want to pipe the output through a tool like less for any non-trivial trace.

Get some stats about a interface/trace

  tracertstats int:eth0

Substitute int:eth0 for pcapfile:trace.gz to produce stats on a trace.

Get more detailed stats on a trace

  tracesummary pcapfile:foo.pcap.gz
  tracereport pcapfile:foo.pcap.gz
  tracertstats pcapfile:foo.pcap.gz

Note that tracereport/tracesummary waits for its input to complete, since an interface never completes it won't ever finish tallying results.

Converting traces

See ConvertingTracesets

To merge two directions back into one file

  tracemerge -i pcapfile:foo-combined.gz pcapfile:foo-in.pcap.gz pcapfile:foo-out.gz

To concatenate traces together

  tracemerge erf:out.gz erf:in-1.gz erf:in-2.gz erf:in-3.gz

Capture a trace file

 traceconvert int:eth0 pcapfile:foo.pcap.gz

Substitute pcapint: for int: if you are not using Linux.

To capture with a filter:

 tracefilter int:eth0 'port 80' pcapfile:foo.pcap.gz

To capture with file rotation, filtering and anonymisation:

 traceanon -sd -c 'foo' int:eth0 pcapfile:- | tracesplit --filter 'port 80' --interval 300 pcapfile:- pcapfile:foo.pcap.gz

This isn't smart enough to do snapping, or anything an advanced capture suite would do. If you need more advanced capturing software use wdcap.

To replay a trace

Warning, this will replay the trace exactly as it was captured -- including IP headers, link level headers, etc.

 traceconvert pcapfile:foo.pcap.gz int:eth0

Speed up trace processing on a dual processor machine

On a dual processor machine you can do decompression on one CPU and the trace processing on another. Having a buffer in between the two will decouple them and get even more cpu usage out of them. At WAND we use the command line:

 zcat tracefile.erf.gz | bfr | ./tool erf:-

NOTE: Libtrace now natively supports threaded IO in 3.0.7, so this is no longer necessary!

1:1 NAT from one IP range to another

This will map on eth0 to on eth1.

 tracefilter int:eth0 'src' pcapfile:- | traceanon -s -p pcapfile:- int:eth1
 tracefilter int:eth1 'dst' pcapfile:- | traceanon -d -p pcapfile:- int:eth0