source: tools/tracestats/tracestats.1 @ 67825b2

4.0.1-hotfixescachetimestampsdevelopdpdk-ndagetsilivegetfragoffhelplibtrace4ndag_formatpfringrc-4.0.1rc-4.0.2rc-4.0.3rc-4.0.4ringdecrementfixringperformanceringtimestampfixes
Last change on this file since 67825b2 was 67825b2, checked in by Perry Lorier <perry@…>, 15 years ago

Update all the man pages to make sure they refer to each other (and fix
any other typo's found along the way). This makes it easier to discover
new libtrace tools

  • Property mode set to 100644
File size: 1.1 KB
Line 
1.TH TRACESTATS "1" "October 2005" "tracestats (libtrace)" "User Commands"
2.SH NAME
3tracestats \- perform simple analysis on a trace
4.SH SYNOPSIS
5.B tracestats
6[ -f | --filter bpf ]... inputuri...
7.SH DESCRPTION
8tracestats reads one or more traces and outputs summaries for each trace of
9how many packets/bytes match each bpf filter, as well as totals.  If instead
10of doing this for the entire trace, but to do it for portions then use
11tracertstats(1) instead.
12.TP
13.PD 0
14.BI \-f " bpf-filter"
15.TP
16.PD
17.BI \-\^\-filter " bpf-filter"
18Add another bpf filter
19
20.SH EXAMPLES
21.nf
22tracestats \-\^\-filter 'host sundown' \\
23        \-\^\-filter 'port http' \\
24        \-\^\-filter 'port ftp or ftp-data' \\
25        \-\^\-filter 'port smtp' \\
26        \-\^\-filter 'tcp[tcpflags] & tcp-syn!=0' \\
27        \-\^\-filter 'not ip' \\
28        \-\^\-filter 'ether[0] & 1 == 1' \\
29        \-\^\-filter 'icmp[icmptype] == icmp-unreach' \\
30        erf:/traces/trace1.gz \\
31        erf:/traces/trace2.gz \\
32.fi
33
34.SH SEE ALSO
35libtrace(3), tracemerge(1), tracefilter(1), traceconvert(1), tracesplit(1),
36tracesplit_dir(1), tracereport(1), tracertstats(1), tracedump(1), traceanon(1),
37tracesummary(1)
38
39.SH AUTHORS
40Perry Lorier <perry@cs.waikato.ac.nz>
Note: See TracBrowser for help on using the repository browser.