source: tools/tracereplay/tracereplay.1 @ 706cd57

4.0.1-hotfixescachetimestampsdevelopdpdk-ndagetsilivegetfragoffhelplibtrace4ndag_formatpfringrc-4.0.1rc-4.0.2rc-4.0.3rc-4.0.4ringdecrementfixringperformanceringtimestampfixes
Last change on this file since 706cd57 was 706cd57, checked in by Andreas Löf <andreas.lof@…>, 11 years ago

added a manpage

  • Property mode set to 100644
File size: 1.4 KB
Line 
1.TH TRACEMERGE "1" "November 2009" "tracereplay (libtrace)" "User Commands"
2.SH NAME
3tracereplay \- Replay a trace in trace time from one uri to another
4.SH SYNOPSIS
5.B tracereplay
6[\-b | \-\^\-broadcast] [-s \-\^\-snaplength [ snaplength] ]
7[\-f | \-\^\-filter [ filter string ] ]
8inputuri outputuri
9.SH DESCRPTION
10tracereplay replays inputuri to outputuri in trace time. Checksums are
11recomputed on the fly.
12
13.TP
14.PD 0
15.BI \-b
16.TP
17.PD
18.BI \-\^\-broadcast
19
20Change the 802.3 (ethernet) destination address to the broadcast address.
21This will send the transmitted packets to any hosts on the local network.
22
23.TP
24.PD 0
25.BI \-s [snaplength]
26.TP
27.PD
28.BI \-\^\-snaplength [snaplength]
29Truncate the packets to the length specified. This is only makes a difference
30 if the inputuri is a capture device. The value should be > 0. Wrong values will
31be ignored, but a warning will be printed.
32
33.TP
34.PD 0
35.BI \-f [ filter string ]
36.TP
37.PD
38.BI \-\^\-filter [ filter ]
39Apply a filter to the inputuri.
40
41.SH LINKS
42More details about tracemerge (and libtrace) can be found at
43http://www.wand.net.nz/trac/libtrace/wiki/UserDocumentation
44
45.SH SEE ALSO
46libtrace(3), tracesplit(1), tracesplit_dir(1), tracefilter(1),
47traceconvert(1), tracereport(1), tracertstats(1), tracestats(1), tracedump(1),
48traceanon(1), tracesummary(1)
49
50.SH AUTHORS
51Andreas Loef <andreas.lof@cs.waikato.ac.nz>, Yuwei Wang <yww4@cs.waikato.ac.nz>
Note: See TracBrowser for help on using the repository browser.